Performance & Capacity
- Rated concrete output per batch
- 3.5 m³
- Drum volume
- 5.5 m³ / 5500 L
- Water tank capacity
- 850 L
- Typical cycle (reference, not guaranteed)
- Approximately 10–15 minutes
CONCRETE & JOBSITE EQUIPMENT
3.5 m³ Self-Loading Concrete Mixer
Self-loading mixer for on-site concrete preparation with 3.5 m³ rated output per batch.
Compare both mixer sizes →
- Rated output
- 3.5 m³
- Internal drum volume
- 5.5 m³
- Engine power
- 85 kW
- Machine weight
- 8260 kg
- Water tank
- 850 L
- Loading bucket
- 0.5 m³
Technical Specifications
This model size describes concrete output per batch. Drum volume is listed separately. Confirm the selected configuration before ordering.
Machine & Dimensions
- Machine curb weight
- 8260 kg
- Overall dimensions (L × W × H)
- 7600 × 2800 × 4180 mm
Engine & Drivetrain
- Engine
- Yuchai 4105 turbocharged diesel
- Rated power
- 85 kW
- Four-wheel drive (4WD)
- Standard
Configuration & Support
- Cooling-only air conditioner
- Standard
- Shipping container
- 40HQ
- Electronic weighing system
- Optional
- Warranty
- 1 year
- Overseas support
- Remote technical guidance; no on-site service
View full technical specifications
- Water supply control
- Time relay
- Gearbox / transmission
- JBJ-320 split torque converter; four forward and four reverse gears
- Hydraulic system
- Closed system 5F-300B reducer; plunger 63 motor; hydraulic drum rotation and lifting
- Total hydraulic system capacity
- 120 L
- Maximum gradeability
- 40°
- Loading bucket volume
- 0.5 m³
- Drum rotation / positioning
- 270°
- Reference production frequency
- 4–6 batches/hour. Under stationary continuous operation at 4–6 batches/hour, with no meaningful transport distance. Reference only; not guaranteed. Actual output varies with operator experience, site workflow, loading conditions and travel/discharge distance.
Maximum gradeability is not a recommended operating slope. Confirm working conditions and operating limits for your site.
Loading, mixing and positioning
0.5 m³
Self-loading bucket
270°
Drum positioning
4WD
Four-wheel drive
10–15 min
Reference production cycle
The double-cone drum uses twin spiral mixing blades and a convex bottom. Hydraulic rotation through a gear pump and swing motor supports mixing, and two double-acting cylinders lift the drum.
The drum support rotates hydraulically through 270° and uses hydraulic brake locking. The manually controlled unloading chute can swing up to 90°. Chute tilt adjustment and drum tilt operation are controlled separately and cannot be performed together. Two chute extensions are included as standard.
Is the 3.5 m³ model right for your jobsite?
Batch Output
Suitable to evaluate when the project requires higher batch demand or larger pours.
Site Access & Transport
Check gates, turning space, ground conditions, unloading clearance and transport limits against the confirmed machine dimensions.
Engine & Market Requirements
Confirm destination-country requirements and engine configuration before quotation.
Engine configurations can be selected according to destination-market requirements. Please provide the destination country and applicable emission requirements when requesting a quotation. Supply to Brazil is currently unavailable.
Need a more compact batch-size option? Compare the 2.6 m³ model →
Configuration, shipping and after-sales support
Configuration
Confirm engine, weighing option and required machine setup before order.
Shipping
Normally shipped in 40HQ. Final packing and shipping arrangement depends on confirmed configuration and destination. Confirm shipping dimensions with your quotation.
After-sales
Remote troubleshooting and replacement-parts support are available after shipment. Overseas support consists of remote technical guidance; no on-site service is provided.
Consider on-site concrete preparation for remote construction sites, rural construction, foundations, road and infrastructure work, and small to medium job sites where ready-mix supply is inconvenient. Plan material supply and a suitable mix design for the project. Site suitability depends on access, ground conditions and the selected machine configuration.
Warranty, parts and technical support →What to confirm before requesting a quote
- Intended application and expected use
- Required quantity
- Whether electronic weighing is required
- Destination country / port
- Engine or destination-market requirements to confirm
FAQ
Buyer Questions
What does the mixer capacity mean?
2.6 m³ and 3.5 m³ describe rated concrete output per batch. They do not describe the total internal drum volume or hourly production.
What is the difference between rated output and drum volume?
Rated output is the concrete produced per batch. The larger drum provides mixing space: 4.2 m³ for the 2.6 m³ model and 5.5 m³ for the 3.5 m³ model.
Which size is better for small construction sites?
Start by comparing the 2.6 m³ model for smaller pours. Choose by batch demand, access, unloading space and transport limits; a smaller rated output alone does not confirm site suitability.
Can the engine configuration be changed for different markets?
Engine configurations can be selected according to destination-market requirements. Please provide the destination country and applicable emission requirements when requesting a quotation. Supply to Brazil is currently unavailable.
What information should I provide before requesting a quotation?
Provide destination country, quantity, required batch output, project type, access constraints, transport requirements and engine or emission requirements. Supply to Brazil is currently unavailable.
Can the machine work where ready-mix concrete supply is difficult?
On-site mixing is an option for remote or rural projects where ready-mix delivery is inconvenient. Plan aggregate, cement and water supply, mix design, operator training and site conditions before choosing equipment.
Plan the surrounding site work
Need a confirmed 3.5 m³ configuration?
Tell us your destination, application and required options. We’ll confirm the machine configuration before quotation.
Email TL Machinery